---
title: How to Setup Beacon Getway
description: "- Reset beacon getway, press the button for 5 second until the light turns red   ![](https://gallery-helpdesk.s3.ap-southeast-1.amazonaws.com/collie/how-to-setup-beacon-getway/f329cc4f-f62b-4895-89be-848fa2cc9f55.png) - Connect to wifi, example wifi **BLE-WIFI_66_2A** (default password : 12345678) ![](https://gallery-helpdesk.s3.ap-southeast-1.amazonaws.com/collie/how-to-setup-beacon-getway/e7b2e7ac-f330-45bf-b73d-15cace0e8b2b.png) - Check the Ip in your connection Click properties on the connected…"
url: "https://colliebots.com/docs/collie/how-to-setup-beacon-getway/"
updated: "2024-09-30"
category: Collie
---

# How to Setup Beacon Getway

- Reset beacon getway, press the button for 5 second until the light turns red
   
  ![](https://gallery-helpdesk.s3.ap-southeast-1.amazonaws.com/collie/how-to-setup-beacon-getway/f329cc4f-f62b-4895-89be-848fa2cc9f55.png)
- Connect to wifi, example wifi **BLE-WIFI_66_2A**
  (default password : 12345678)
  ![](https://gallery-helpdesk.s3.ap-southeast-1.amazonaws.com/collie/how-to-setup-beacon-getway/e7b2e7ac-f330-45bf-b73d-15cace0e8b2b.png)
- Check the Ip in your connection
  Click properties on the connected WiFi, then scrull to the bottom and copy IPv4Address
  ![](https://gallery-helpdesk.s3.ap-southeast-1.amazonaws.com/collie/how-to-setup-beacon-getway/e1293890-dba2-482b-bff4-aae9ed9578fe.png)
- Copy IPv4 addres di browser, dirrected to the beacon settings page
  ![](https://gallery-helpdesk.s3.ap-southeast-1.amazonaws.com/collie/how-to-setup-beacon-getway/54736714-2019-41dc-b2d1-55640c144c47.png)
- WiFi settings, change WiFi mode to station, connect to WiFi that is connected to the internet, and then save.
  ![](https://gallery-helpdesk.s3.ap-southeast-1.amazonaws.com/collie/how-to-setup-beacon-getway/df9a4293-b428-47f3-b70a-917462774d39.png)
- Go to Applications page,
  - Fill in the Client ID with the name of the getway beacon that you will register in Cullie. 
  - Fill in the Host/Ip, Username and password that were previously provided by the Magicsoft Team.
  - Makesure Host/Ip, Port, Public Topic, Username, and Password are filled in.
  - Fill in the Request Interval with the 60 (in secs).
  - Click Save
  ![](https://gallery-helpdesk.s3.ap-southeast-1.amazonaws.com/collie/how-to-setup-beacon-getway/0fd733e4-5104-4332-bacb-00e54130189d.png)
- Make sure everything you have set is saved, then **click** **Reboot**.
- End the next steps, fullow this [How to Setup Floor Plan on Cullie](https://help.magicsoft-asia.com/portal/en/kb/articles/how-to-setup-floor-plan-on-cullie)